I notice there is an eSATA connector available on the motherboard (orange connector as specified here). 87Mb/s for the old ST3160318AS drive that came standard with the 6000, so about 2.5x's faster, but again, not near expectations. It's definitely faster, about 212Mb/s vs. I used a SATA II "drive" cable from one of the optical drives to connect it internally. Likewise, I've installed a brand new Samsung 840 EVO SSD. Is this normal, or am I missing something? Everything "looks" good the ports are working, in that they connect to my USB 3.0-compatible external hard drives, but the USB 3.0 speed is much less than anticipated, only about 3'xs faster, benchmarked using HD Tune Pro. The new ports are recognized, with no errors in Device Manager. I then installed the software driver directly from the TI web site because it is newer than what's on the included CD. I recently purchased the HP USB 3.0 4-port SuperSpeed PCIe x1 Card ( QT587AA) and installed it in the back of my HP Compaq 6000 Pro as directed. The StarTech PEXSAT32 along with the Western Digital WD30EZRX 3 TB hard drive made worked like a charm in my HP Compaq dc7100 CMT and will allow me to use this solid machine for a few more years as a small home office server, mainly used to share files. Some friends were very skeptical about the controller card approach and recommended that I go with an external USB HDD case, but quite frankly, not only was I afraid to loose too much speed, I did not like the idea of have an external HDD lying around the computer at all times. I converted the drive to GPT (as opposed to MBR) and could enjoy a nice 3 TB partition. I installed the controller, turned on the computer, installed the drivers with the supplied CD (I run Windows 2003 Serve, but apparently no drivers are needed for Windows 7), powered off the computer, installed the drive, powered on the computer and voilĂ !, Windows could see the entire 3 TB of my drive. I went ahead and purchased a PCI Express controller card (a StarTech PEXSAT32 - a 2 port SATA 6 Gbps SATA Controller under $40). Anyways, since I found a working solution by myself, I thought I would come back and share my findings with other users who may be faced with a similar situation. Some time has passed since I posted my original message, but unfortunately nobody had anything to share.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2023
Categories |